About This Document
Purpose
This document describes how to perform daily management and basic maintenance of the storage systems. It also provides configuration and standards for your reference.
The following table lists the product models to which this document is applicable.
Product Series |
Product Model |
|---|---|
OceanStor Dorado V6 series |
OceanStor Dorado 3000 V6 |
OceanStor Dorado 5000 V6 |
|
OceanStor Dorado 6000 V6 |
|
OceanStor Dorado 8000 V6 |
|
OceanStor Dorado 18000 V6 |
Intended Audience
This document is intended for:
- Technical support engineers
- Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. |
|
Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. |
|
Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 10 (2021-11-24)
This issue is the tenth official release, which incorporates the following changes:
Optimized the description in this document.
Issue 09 (2021-06-25)
This issue is the ninth official release, which incorporates the following changes:
Added the section "Viewing Historical Tasks".
Issue 08 (2021-04-10)
This issue is the eighth official release, which incorporates the following changes:
Optimized the description in this document.
Issue 07 (2020-12-20)
This issue is the seventh official release, which incorporates the following changes:
Optimized the description in this document.
Issue 06 (2020-08-15)
This issue is the sixth official release, which incorporates the following changes:
Optimized the description in this document.
Issue 05 (2020-06-05)
This issue is the fifth official release, which incorporates the following changes:
Optimized description about section User Levels, Roles, and Permissions.
Issue 04 (2020-04-20)
This issue is the fourth official release, which incorporates the following changes:
Added the section "How Do I Update the Public Key When a Linux Host Fails to Remotely Log In to the Storage System's BMC System via SSH Due to the Invalid Public Key?".
Issue 03 (2020-03-11)
This issue is the third official release, which incorporates the following changes:
Optimized description about section Expanding the LUN Capacity on a Red Hat Application Server.
Issue 02 (2020-01-10)
This issue is the second official release, which incorporates the following changes:
Added the section "Erasing Data from Disks".
Added the section "Managing Login Authentication Methods".
Added the section "Configuring a CAS Server".
Added the section "Powering on the Storage System (by Running a CLI Command, Applicable to 6.0.0 and Later)".
Issue 01 (2019-10-30)
This issue is the first official release.