Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Re-Powering on the Storage Device After an Emergency Power-off
Re-power on the storage device that was powered off upon on an emergency by learning about the following information.
Re-powering on the storage device that was powered off in an irregular way may incur exceptions. If this happens, record the error messages and contact our technical support engineers for troubleshooting.
To power on a storage system that went through an emergency or unexpected power-off, follow the correct power-on procedure. Note that you do not need to press the power button because the engines will automatically power on after being connected to a power supply.
