About This Document
Purpose
Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.
Product Series |
Product Model |
|---|---|
OceanStor Dorado V6 series |
Dorado 3000 V6 |
Dorado 5000 V6 |
|
Dorado 6000 V6 |
|
Dorado 8000 V6 |
|
Dorado 18000 V6 |
Intended Audience
- Technical support engineers
- Maintenance engineers
Content Conventions
The purchased products, services, and features are stipulated by the commercial contract made between Huawei and the customer. All or partial products, services and features described in this document may not be within the purchased scope or the usage scope. Unless otherwise agreed by the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees, or representations of any kind, either express or implied
As part of an effort to improve and enhance the performance and capabilities of its product line, Huawei Technologies Co., Ltd. from time to time releases revisions of its hardware and software. Therefore, some functions described in this manual may not be supported by all revisions of the software or hardware currently in use. For the most up-to-date information on product features, refer to your product release notes.
If a product does not function as described in this manual, please contact your Huawei Technologies Co., Ltd. technical support.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. |
|
Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. |
|
Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 08 (2021-06-25)
This issue is the eighth official release.
Issue 07 (2021-04-10)
This issue is the seventh official release.
Issue 06 (2020-12-20)
This issue is the sixth official release.
Issue 05 (2020-08-15)
This issue is the fifth official release, which incorporates the following changes:
Updated command references.
Issue 04 (2020-06-05)
What's New
Updated command references.
Issue 03 (2020-04-20)
This issue is the third official release.
Modified commands:
- show system pool_config
- change system pool_config
Added parameter Performance Check Switch is only applicable to OceanStor Dorado V6 6.0.0.SPH7 and later.
Issue 02 (2020-01-10)
What's New
Updated command references.
Issue 01 (2019-10-30)
This is the first official release.