Using the xlight FTP Tool to Deploy the FTP Backup Server

Enterprise

Worldwide

- Türkçe

History
Popular search
Switches Routers Servers Storage Data Center Energy Cloud Computing
Quick access
Recommended

OceanStor Dorado 6.0.0 Disk Encryption User Guide

This document introduces how to install and configure key management servers connected to the storage systems that use self-encrypting disks.

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

Using the xlight FTP Tool to Deploy the FTP Backup Server

This section describes how to deploy the FTP backup server by using the xlight FTP tool. For details on how configure other FTP servers, see their respective configuration documentation.

Prerequisites

The FTP server software installation package is ready.
The IP address to be configured can properly communicate with the storage system.

Procedure

Start the Xlight FTP server software.
The Xlight FTP Server page is displayed.
Configure a virtual server.
1. On the Xlight FTP Server page, click .
  The New Virtual Server dialog box is displayed.
2. In the New Virtual Server dialog box, set IP Address, Port, and Protocol to the local IP address, 21, and FTP, respectively.
3. Click OK.
  The added virtual server is displayed in the Xlight FTP Server page that is displayed.
Start the virtual server.
Select the added virtual server and click to start the server.

You can also select the added virtual server, right-click, and choose Start Server to start the server.
Add a user.
1. On the Xlight FTP Server page, click .
  The user list is displayed.
2. Click .
  The adding users dialog box is displayed.
3. In the dialog box, enter Username and Password and set Home Directory.
4. Click OK.
  The user is added, and user information is displayed on the user page.
Set virtual directory permissions.
1. In the user list, select the added user and click .
  The user name page is displayed.
2. On the navigation bar on the left, click .
  The user directory management page is displayed.
3. Select the access directory of the added user and click .
  The Virtual Directory dialog box is displayed.
4. In the Permission area, set permissions.
5. Click OK.
  Virtual directory permissions are configured.