Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF00060020 The Cable Between Two Ports Is Incorrectly Connected
Applicable Model
Applicable to all models.
Procedure
- Check whether the cable is connected according to the standard network.
- If yes, remove and insert the cable. Wait 6 minutes. If the alarm persists=> Step2.
- If no, reconnect the cable according to the standard network. If the expansion cables of the disk enclosure are connected to different controller enclosures and the disk enclosure is powered on, remove all expansion cables of the disk enclosure and connect them to the correct ports. If the alarm persists=> Step2.
- Collect related information and contact technical support engineers.