Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF00E00043 Remote Device Is Faulty
Applicable Model
Applicable to all models.
Impact on the System
If the remote device is disconnected, services such as HyperMetro and remote replication between the local and remote storage arrays are interrupted.
Possible Causes
- Packet loss or bit errors occur on the local or remote port.
- Packet loss, disorder, or bit errors occur on the switch.
- The remote array is faulty.
- The service load on the local or remote array is too heavy.
Procedure
- Check whether an alarm about the replication link port is generated.
- Check whether the switch related to the replication link is normal.
- Check whether the remote array is faulty or powered off.
- Check whether the service load on the local and remote arrays is too heavy.
- If yes, contact technical support engineers for capacity expansion and service optimization.
- If no, collect related information and contact technical support engineers.