No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF00CF007D The Controller Is Being Repaired
0xF00CF007D The Controller Is Being Repaired
Description
The controller is being repaired.
Applicable Model
Applicable to all models.
Attribute
ID
Event Type
Event Level
Automatically Cleared
0xF00CF007D
Alarm
Warning
Yes
Impact on the System
During controller repairing, reliability of the storage system decreases.
With the write protection function enabled (by default) for a single controller in the controller enclosure, if the controller that fails to be started cannot recover within the specified period, the write function of services on the controller enclosure where the faulty node resides is disabled and read/write performance deteriorates.
Possible Causes
An internal fault occurred on the controller.
Procedure
Wait about 30 minutes until the fault is rectified.