Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF01080015 Port Has Too Many Bit Errors
Applicable Model
Applicable to all models.
Impact on the System
The application server or other devices cannot communicate with the storage system through the port. The system performance may be affected.
Possible Causes
- Cables are not securely connected or are damaged.
- The optical module of the local port or its peer port is faulty.
- The local port or its peer port is faulty.
- The interface module where the local port or its peer port resides is faulty.
- The MTU values of the local port and its peer port do not match.
Procedure
- Check cables.
- Check whether optical modules are installed.
- Replace the interface modules where the port and its peer port reside. If the alarm persists=> Step4.
- If the local and peer ports are ETH/FCoE ports, check whether their MTU values match.
- Check whether the current network is an FC/FCoE switch network.
- Check the cable connection of all links from the remote device to the switch.
- Replace the optical module of the remote device port and switch port. If the alarm persists=> Step8.
- If the remote device port and switch port are FCoE ports, check whether their MTU values match.
- Collect related information and contact technical support engineers.