Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xF0006001F The Cable Is Incorrectly Connected To A Port
Applicable Model
Applicable to all models.
Procedure
- Check whether the cables are connected according to the standard networking.
- If yes=> Step2.
- If no, reconnect the cables according to the standard networking. If expansion cables of disk enclosures are connected to different controller enclosures by mistake and the disk enclosures are powered on, remove all expansion cables of the disk enclosures and reconnect them to the correct ports. If the expansion cables of the disk enclosure are connected to different loops of the controller enclosure by mistake and the disk enclosure is powered on, remove all the cables from the expansion module and reconnect the cables to the correct ports. If the alarm persists=> Step2.
- Collect related event information and contact technical support engineers.