Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a HyperCDP CG
This operation enables you to delete a HyperCDP CG. After a HyperCDP CG is deleted, the resources it occupies are released.
Prerequisites
- A HyperCDP CG has been created in the storage system.
- Running Status of a HyperCDP CG is not Rolling back.
Procedure
- Choose Data Protection > Plans > HyperCDP > HyperCDP CGs.
- Select the desired HyperCDP CG and click Delete.
Confirm your operation as prompted.
Alternatively, perform any of the following operations to delete a HyperCDP CG:
- Click
on the right of the desired HyperCDP CG and select Delete.
- Click the name of the desired HyperCDP CG. In the upper right corner of the page that is displayed, select Delete from the Operation drop-down list.
- Choose Services > Block Service > LUN Groups.
- Click the name of the desired LUN group. On the page that is displayed, click the Protection tab and select HyperCDP from the drop-down list. Select the desired HyperCDP CG and click Delete.
- Click the name of the desired LUN group. On the page that is displayed, click the Protection tab and select HyperCDP from the drop-down list. Click
on the right of the desired HyperCDP CG and select Delete.
- Choose Data Protection > Protection Entities > Protection Groups > Protection Groups.
- Click the name of the desired PG. On the page that is displayed, click the Protection tab and select HyperCDP from the drop-down list. Select the desired HyperCDP CG and click Delete.
- Click the name of the desired PG. On the page that is displayed, click the Protection tab and select HyperCDP from the drop-down list. Click
on the right of the desired HyperCDP CG and select Delete.
- Click the value in the HyperCDP CGs column of the desired PG if the value is not 0. On the Protection tab page, select HyperCDP from the drop-down list. Select the desired HyperCDP CG and click Delete.
- Click the value in the HyperCDP CGs column of the desired PG if the value is not 0. On the Protection tab page, select HyperCDP from the drop-down list. Click
on the right of the desired HyperCDP CG and select Delete.
- Click
on the right of the desired HyperCDP CG and select Delete.
on the right of the desired HyperCDP CG and select Delete.
on the right of the desired HyperCDP CG and select Delete.
on the right of the desired HyperCDP CG and select Delete.
