Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configure Mapping
This section describes how to create one-to-one or many-to-one mapping relationships between LUNs and hosts.
Description
- To configure the mapping, log in to DeviceManager and choose Services > Block Service > LUNs.
- For details on how to configure the mapping, see the OceanStor Dorado 6.0.0 Basic Storage Service Configuration Guide.
Follow-up Procedure
After creating a HyperMetro pair, scan for LUNs on the hosts to check whether the mapping is successful.
- Log in to a host as user root.
- Run the hot_add command to scan for LUNs.
- Run the upadmin show vlun type=all command to query the LUNs mapped to the host.