Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a HyperMetro CG
This section describes how to delete a HyperMetro CG if it is no longer used.
Prerequisites
Running Status of the HyperMetro CG is Paused.
Context
Only CGs of HyperMetro pairs are deleted but not the HyperMetro pairs.
Procedure
- Choose Data Protection > Protection Entities > Protection Groups.
- Click the HyperMetro CGs tab. Select the HyperMetro CG that you want to delete and click Delete.Confirm your operation as prompted.
You can also perform the following operations to delete a HyperMetro CG:
- Click
on the right of the desired HyperMetro CG and select Delete.
- Click the name of the desired HyperMetro CG. In the upper right corner of the page that is displayed, click Operation and select Delete.
- Click
on the right of the desired HyperMetro CG and select Delete.