Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a HyperMetro Pair
If a HyperMetro is no longer needed, you can delete it.
Prerequisites
You can delete a HyperMetro pair only when its Running Status is Paused, Force started, Invalid, or To be synchronized, and its secondary LUNs are not mapped.
Procedure
- Choose Data Protection > Protection Entities > LUNs.
- Click the HyperMetro Pairs tab. Select the desired HyperMetro pair and click Delete.Confirm your operation as prompted.
You can also delete a HyperMetro pair as follows:
- Click
on the right of the desired HyperMetro pair and select Delete.
- Click the name of the desired HyperMetro pair. In the upper right corner of the page that is displayed, select Delete from the Operation drop-down list.
- Click
on the right of the desired HyperMetro pair and select Delete.