Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding a LUN
This section describes how to add a LUN to a PG.
Prerequisites
The members of the PG are LUNs.
Procedure
- Choose Data Protection > Protection Entities > Protection Groups > Protection Groups.
- Click
on the right of a PG and select Add LUN.
The Add LUN page is displayed on the right.
Alternatively, perform any of the following operations to go to the Add LUN page:
- Click the name of the desired PG. In the upper right corner of the page that is displayed, select Add LUN from the Operation drop-down list.
- Click the name of the desired PG. On the page that is displayed, click the Members tab and then click Add.
- Click the value in the LUNs column of the desired PG if the value is not 0. On the Members tab page, click Add.
- Add LUNs to the PG.
- Select the LUNs to be added to the PG.
- Click
to add the LUNs to the Selected LUNs area.
- Click OK.
on the right of a PG and select Add LUN.
to add the LUNs to the Selected LUNs area.