Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying PGs
This section describes how to modify the basic information of PGs.
Procedure
- Choose Data Protection > Protection Entities > Protection Groups > Protection Groups.
- Click
on the right of a PG and select Modify.
The Modify PG page is displayed on the right.
You can also click the name of the desired PG. In the upper right corner of the page that is displayed, click Operation and then select Modify to modify the PG.
- Set the Name for the PG.
- The name must be unique.
- The name contains letters, digits, underscores (_), periods (.), and hyphens (-).
- The name must contain 1 to 31 characters.
- (Optional) Set the PG description.
The description can be left blank or contain up to 255 characters.
- Click OK.
on the right of a PG and select Modify.