Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Flowchart
Configuring a snapshot task involves checking the HyperSnap license, creating LUNs, and creating snapshots.
Figure 2-1 is the flowchart for configuring a snapshot task.
Table 2-1 describes the operations to configure snapshot, purposes of these operations, precautions, and references.
Table 2-1 Steps of configuring a snapshot task
Step |
Operation |
Description |
Reference |
|---|---|---|---|
Check the availability of HyperSnap. |
Check the HyperSnap license. |
Verify that the license supports HyperSnap. |
|
Create a snapshot. |
(Optional) Create a source LUN. |
In the storage pool, create source LUNs that require snapshot protection. |
|
Create a snapshot. |
Follow the wizard on DeviceManager to create a snapshot manually. |