Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Cluster Maintenance
Common Maintenance Commands
Viewing the Cluster Status
The command syntax is as follows:
# scstat
Switching Resources
Switch resources from a node to another node by running the following command:
scswitch -z -g resource_name -h host_name
Cluster Messages
If a cluster is not running properly, you can use cluster logs and messages to help locate the cause.
Log information is stored on the /var/adm/messages path.
You can query error messages at:
http://docs.oracle.com/cd/E19050-01/sun.cluster31/819-0427/6n2rsdb6f/index.html