Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Process
Figure 5-19 Initial configuration process
![]()
Table 5-6 Configuration process
Step |
Action |
|---|---|
Set the management network port IP address. |
Set an IP address for the management network port. |
Log in to the iBMC WebUI. |
Log in to the iBMC WebUI from a local PC. |
Check the server. |
|
Change the initial password. |
|
Configure RAID. |
Configure RAID for the server. For details, see Huawei Server RAID Controller Card User Guide (Arm). |
Configure the BIOS. |
Configure the server BIOS, including the boot mode and BIOS password. |
Install an OS. |
Install an OS for the server. |