Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring RAID
Single-Node Deployment
- Log in to the iBMC WebUI. For details, see Logging In to the iBMC WebUI.
- On the top menu bar, choose System > System Info. The System Info page is displayed.
- On the Other tab page, view the RAID controller card information, as shown in Figure 5-45:
The information displayed is for reference only. The actual information may differ.
- Configure the RAID.
The RAID configuration method varies according to the RAID controller card model. For details, see Huawei Server RAID Controller Card User Guide (Arm).
Batch Deployment
For details about batch RAID configuration, see "Configuring the RAID" or "Server Deployment" in the SmartKit Computing User Guide.