No relevant resource is found in the selected language.
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Built-in-Drive Backplane Cabling (Server with 1 x PCIe RAID Controller Card)
Built-in-Drive Backplane Cabling (Server with 1 x PCIe RAID Controller Card)
Built-in-Drive Backplane Cabling
Figure 5-60 Built-in-drive backplane cabling
Table 5-60 Built-in-drive backplane cabling
No.
Huawei BOM Code
Description
1
04051059
SAS cable for connecting the built-in-drive backplane (J3) to PORT D of the screw-in RAID controller card
2
04051948
NOTE:
The cable is not an independent spare part. It is packed with the built-in-drive backplane as a spare part.
Indicator signal cable for connecting the built-in-drive backplane (J1) to the mainboard (J122)
3
04150448-001
Power cable for connecting the built-in-drive backplane (J2) to the mainboard (J171)