Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing a USB Flash Drive
Removing an External USB Flash Drive
Procedure
- Determine the position of the USB flash drive.
- Eject the USB flash drive.
- On the Linux OS, run the umount command.
- On the Windows OS, right-click the USB flash drive and choose Eject from the shortcut menu.
- Remove the USB flash drive from the USB port.Figure 8-145 Removing a USB flash drive
- Place the removed component in an ESD bag.
Removing a Built-in USB Flash Drive
Procedure
- Power off the server.
For details, see Power-Off Procedure.
- Remove the power cables from the PSUs.
For details, see Removing PSU Cables.
- Remove the server.
For details, see Removing the Server.
- Place the server on the ESD workstation.
- Remove the chassis cover.
For details, see Removing the Chassis Cover.
- Determine the position of the built-in USB flash drive.Figure 8-146 Position of the built-in USB flash drive
- Remove the USB flash drive from the USB port.Figure 8-147 Removing a USB flash drive
- Place the removed component in an ESD bag.
