FlexIO Cards
FlexIO cards provide network expansion capabilities.
- The FlexIO card (with electrical ports) cannot be connected to power over Ethernet (PoE) devices (such as a switch with PoE enabled). Otherwise, link communication failure or even damage to the FlexIO card may be caused.
- Contact your local Huawei sales representative or use the Computing Product Compatibility Checker to determine the components to be used.
NIC Model |
Chip Model |
Port Type |
Number of Ports |
Support NC-SI/WOL/PXE |
---|---|---|---|---|
SM210 |
5719 |
GE electrical port |
4 |
√ |
SM211 |
i350 |
GE electrical port |
2 |
√ |
SM212 |
i350 |
GE electrical port |
4 |
√ |
SM233 |
X540 |
10GE electrical port |
2 |
√ |
SM251 |
CX3 |
56G IB optical port |
2 |
× |
SM252 |
CX3 |
56G IB optical port |
1 |
× |
SM330 |
X710 |
10GE optical port |
2 |
√ |
SM380 |
CX4 |
25GE optical port |
2 |
√ |
Indicator Positions
- SM210/SM212 with four GE electrical portsFigure 2-20 SM210/SM212 network port indicators
- SM211 with two GE electrical portsFigure 2-21 SM211 network port indicators
- SM233 with two 10GE electrical portsFigure 2-22 SM233 network port indicators
- SM251 with two 56G IB optical portsFigure 2-23 SM251 network port indicators
- SM252 with one 56G IB optical portFigure 2-24 SM252 network port indicators
- SM330 with two 10GE optical ports/SM380 with two 25GE optical portsFigure 2-25 SM330/SM380 network port indicators
Indicator Description
Port Type |
Indicator |
Description |
---|---|---|
GE electrical port |
Data transmission status indicator |
|
Connection status indicator |
|
|
10GE electrical port |
Transmission rate indicator |
|
Connection status indicator/Data transmission status indicator |
|
|
10GE optical port |
Transmission rate indicator |
|
Connection status indicator/Data transmission status indicator |
|
|
25GE optical port |
Transmission rate indicator |
|
Connection status indicator/Data transmission status indicator |
|
|
56G IB optical port |
Connection status indicator |
|
Data transmission status indicator |
|