Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
I/O Module 1 (2 x 2.5" SAS/SATA Drives)
I/O Module 1 Cabling
Figure 7-41 I/O module 1 cabling
![]()
Table 7-41 I/O module 1 cabling
No. |
Huawei BOM Code |
Description |
|---|---|---|
1 |
04051060 NOTE:
The cable is not an independent spare part. It is packed with the 2 x 2.5" backplane as a spare part. |
SAS cable for connecting the 2 x 2.5" drive backplane (J3) to the 12 x 3.5" drive EXP backplane (J31) NOTE:
The Y-shaped end of the cable is connected to the 2 x 2.5" drive backplane. Connector HDD A corresponds to the backplane of I/O module 1 and connector HDD B corresponds to the backplane of I/O module 2. Use cable connectors based on actual situation. |
2 |
04051053 |
Indicator signal cable for connecting the 2 x 2.5" drive backplane (J24) to the 12 x 3.5" drive EXP backplane (J32) |
3 |
04150448-001 |
Power cable for connecting the 2 x 2.5" drive backplane (J1) to the mainboard (J127) |
