Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
12 x 3.5" Drive EXP Backplane SAS Signal Cables (Server with a PCIe RAID Controller Card)
12 x 3.5" Drive EXP Backplane SAS Signal Cabling
Figure 7-40 12 x 3.5" drive EXP backplane SAS signal cabling
![]()
Table 7-40 12 x 3.5" drive EXP backplane SAS signal cabling
No. |
Huawei BOM Code |
Description |
|---|---|---|
1 |
04051018 |
SAS cable for connecting PORT A (J28) of the 12 x 3.5" drive EXP backplane to C0 of the PCIe RAID controller card |
2 |
04051018 |
SAS cable for connecting PORT B (J29) of the 12 x 3.5" drive EXP backplane to C1 of the PCIe RAID controller card |
- The PCIe RAID controller card can be installed only in slot 3.
- The port numbers vary with the PCIe RAID controller cards. The port number of the PCIe RAID controller card connected to front-drive backplane PORT A (J28) may be C0, PORT A, 0, or CN0, and the port number of the PCIe RAID controller card connected to front-drive backplane PORT B (J29) may be C1, PORT B, 1, or CN1.
