Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the Avago SAS3004iMR PCIe RAID Control Card
Procedure
- Power off the server.
For details, see Power-Off Procedure.
- Remove the power cables from the PSUs.
For details, see Removing PSU Cables.
- Remove the server.
For details, see Removing the Server.
- Place the server on the ESD workstation.
- Remove the chassis cover.
For details, see Removing the Chassis Cover.
- Determine the position of the Avago SAS3004iMR RAID controller card.
- Remove the M.2 FRU from the Avago SAS3004iMR RAID controller card.
For details, see Removing an M.2 FRU on the Avago SAS3004iMR PCIe RAID Controller Card.
- Remove the PCIe riser modules.
For details, see Removing a PCIe Riser Module.
- Remove the Avago SAS3004iMR RAID controller card.
For details, see Removing a PCIe Card.
- Place the removed component in an ESD bag.