Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Chassis Cover
Procedure
- Place the server on the ESD workstation.
- Take the spare part out of its ESD bag.
- Install the chassis cover.
- Align the cover with the fixing slots on chassis walls and put down the cover. See (1) in Figure 6-22.
- Close the latch handle. See (2) in Figure 6-22.
- Use a flat-head screwdriver to fasten the latch screw of the cover clockwise. See (3) in Figure 6-22.
- Install the server.
For details, see Installing a Server.
- Connect the power cables to the PSUs.
For details, see Connecting PSU Cables.
- Power on the server.
For details, see Power-On Procedure.
