No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
I/O Module 1 (2 x 3.5" SAS/SATA Drives)
I/O Module 1 (2 x 3.5" SAS/SATA Drives)
I/O Module 1 Cabling
Figure 5-48 I/O module 1 cabling
Table 5-48 I/O module 1 cabling
No.
Huawei BOM Code
Description
1
04150448-001
Power cable for connecting the 2 x 3.5" drive backplane (J1) to the mainboard (J127)
2
04051053
Indicator signal cable for connecting the 2 x 3.5" drive backplane (J24) to the 12 x 3.5" drive pass-through backplane (J30)
3
04051059
NOTE:
The cable is not an independent spare part. It is packed with the 2 x 3.5" backplane as a spare part.
SAS cable for connecting the 2 x 3.5" drive backplane (J3) to PORT D of the screw-in RAID controller card