Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Signal Cables for Connecting the 24 x 2.5" Drive NVMe Backplane to the NVMe SSD Adapter
Signal Cabling for Connecting the 24 x 2.5" Drive NVMe Backplane to the NVMe SSD Adapter
Figure 7-86 Signal cabling for connecting the 24 x 2.5" drive NVMe backplane to the NVMe SSD adapter
![]()
Table 7-86 Signal cabling for connecting the 24 x 2.5" drive NVMe backplane to the NVMe SSD adapter
No. |
Huawei BOM Code |
Description |
|---|---|---|
1 |
04052105 |
Signal cable for connecting Slimline A/Slimline B (J6/J5) of the 24 x 2.5" drive NVMe backplane to NVMe SSD adapter 1 |
2 |
04052105-001 |
Signal cable for connecting Slimline C/Slimline D (J7/J8) of the 24 x 2.5" drive NVMe backplane to NVMe SSD adapter 2 |
- Connect cables according to port labels on cables and silk screens on the NVMe SSD adapter or drive backplane. For example, connect the cable labeled PORT 0 to PORT 0 of the NVMe SSD adapter, and connect the cable labeled PORT A to PORT A of the drive backplane.
- When connecting Slimline cables, connect the shorter cables and then the longer ones.
- To facilitate operations, remove the backplane before removing the power cables.
