I/O Module 3 (4 x 2.5" SAS/SATA Drives)
SAS/SATA drives can be installed in I/O module 3 only when an SP460C-M (Broadcom SAS3516) PCIe RAID controller card is configured.
I/O Module 3 Cabling
No. |
Huawei BOM Code |
Description |
|---|---|---|
1 |
04051931 NOTE:
The cable is not an independent spare part. It is packed with the 4 x 2.5" drive backplane as a spare part. |
Signal cable for connecting Slimline B (J9) of the 4 x 2.5" drive backplane to Slimline B (J139) of the mainboard |
2 |
04051059-002 NOTE:
The cable is not an independent spare part. It is packed with the 4 x 2.5" drive backplane as a spare part. |
SAS cable for connecting the 4 x 2.5" drive backplane (J2) to PORT C of the PCIe RAID controller card |
3 |
04051931 NOTE:
The cable is not an independent spare part. It is packed with the 4 x 2.5" drive backplane as a spare part. |
Signal cable for connecting Slimline A (J8) of the 4 x 2.5" drive backplane to Slimline A (J140) of the mainboard |
4 |
04150448-001 |
Power cable for connecting the 4 x 2.5" drive backplane (J22) to the mainboard (J172) |
5 |
04051122 |
Low-speed signal cable for connecting the 4 x 2.5" drive backplane (J23) to the mainboard (J164) |