Symbols on Devices
Symbol |
Name |
Description |
---|---|---|
Warning |
Misoperations may cause personal injury or damage to the equipment. |
|
External grounding |
External grounding of a device. Connect one end of the ground cable to the device, and the other end to a ground point. Ground the device through the ground point to ensure personal and device safety. |
|
Internal grounding |
Internal grounding of a device. Connect the two ends of a ground cable to different components of the same device. Ground the device through the ground point to ensure personal and device safety. |
|
ESD |
Electrostatic sensitive area. Do not touch a device in this area with bare hands. When handling a device in an ESD-sensitive area, take ESD measures, such as wearing an ESD wrist strap or ESD gloves. |
|
Altitude |
The device operates properly at an altitude of 2000 m or lower. The symbol applies only to CCC. |
|
Tilt |
The device may tilt. Do not push the device with force. |
|
High touch current |
The device has high touch current. Ground it before connecting to power. |
|
Do not touch |
Maintain a safe distance from the moving fan blades. |
|
Warning |
At least two people are required for moving the device. |
|
Warning |
At least three people are required for moving the device. |
|
Warning |
A pallet truck or at least four people are required for moving the device. |
|
Do not stack |
Do not stack after unpacking. This may cause damage to the device. |
|
Do not hold the handle |
Do not carry the device by holding its handle. This may cause personal injury or damage to the device. |
|
Multiple power sources |
The device is supplied by multiple sources of power. Disconnect all power cables before you power off the device. |