Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing VMD
The Intel Volume Management Device (VMD) is a module integrated in the processor on the Purley platform. It is used for surprise hot plug, management, and error processing of SSDs.
- To use the VMD function, the iBMC version must be V304 or later. Otherwise, the iBMC WebUI may fail to display NVMe drive information and the fan speed cannot be adjusted based on the NVMe drive temperature, affecting the heat dissipation of NVMe drives.
- The VMD function must be enabled on the BIOS in UEFI mode only. The BIOS in legacy mode does not support this setting.
- If the VMD function is enabled and the latest VMD driver is installed, the NVMe drives support surprise hot swap. If the VMD function is disabled, NVMe drives support orderly hot swap.
