Removing an M.2 FRU on the Avago SAS3004iMR PCIe RAID Controller Card
The M.2 FRU on the Avago SAS3004iMR RAID controller card is hot swappable.
Procedure
- Determine the positions and slots of the M.2 FRUs on the Avago SAS3004iMR RAID controller card.
Determine the position of the M.2 FRU to be removed. Do not remove the M.2 FRU running an OS. Otherwise, all services on the server will be affected.
Figure 8-84 Positions and slots of the M.2 FRUs - Remove the M.2 FRU from the Avago SAS3004iMR RAID controller card.
- Open the handle of the M.2 FRU. See (1) in Figure 8-85.
- Remove the M.2 FRU. See (2) in Figure 8-85.
- Place the removed component in an ESD bag.
- Install an M.2 FRU filler module to shield the EMC.
Perform this step only when an M.2 FRU is not installed immediately.