Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Accessing the BIOS
Procedure
- Log in to the desktop of the server.
For details, see Logging In to the Desktop of a Server.
- On the Remote Virtual Console, click
on the menu bar.
- Choose Forced System Reset or Forced Power Cycle.
The Select an Option dialog box is displayed.
- A forced reset or power cycle may cause data loss or program damage.
- Before performing a forced reset or power cycle, ensure that no service interruption risk exists.
- Click Yes.
The server starts to be forcibly reset or power cycled.
- During the reset, press Delete or F4 when the information shown in Figure 10-20 is displayed.
- To go to the Boot Manager screen, press F11 or F3.
- To boot from the network, press F12. Enter the password in the displayed dialog box.
- To access the Smart Provisioning GUI, press F6.
The screen for entering the BIOS password is displayed.
Figure 10-21 Entering the BIOS password - Enter the BIOS password.
- The default BIOS password is Admin@9000.
- Press F2 to alternate between the English (US), French, and Japanese keyboards.
- Use the mouse to open the on-screen keyboard and enter the password.
- For security purposes, change the administrator password periodically.
- The system will be locked if an incorrect password is entered three consecutive times. You can restart the server to unlock it.
The Front Page screen is displayed.
- Select BIOS Configuration by pressing arrow keys.
The Main screen is displayed.
on the menu bar.
