Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a USB Flash Drive
Installing an External USB Flash Drive
Procedure
- Take the spare part out of its ESD bag.
- Determine the position of the USB flash drive.
- Insert the USB flash drive into the USB port.Figure 6-150 Installing a USB flash drive
Installing a Built-in USB Flash Drive
Procedure
- Power off the server.
For details, see Power-Off Procedure.
- Remove the power cables from the PSUs.
For details, see Removing PSU Cables.
- Remove the server.
For details, see Removing the Server.
- Place the server on the ESD workstation.
- Remove the chassis cover.
For details, see Removing the Chassis Cover.
- Take the spare part out of its ESD bag.
- Determine the position of the built-in USB flash drive.Figure 6-151 Position of the built-in USB flash drive
- Insert the USB flash drive into the USB port.Figure 6-152 Installing a USB flash drive
- Install the chassis cover.
For details, see Installing the Chassis Cover.
- Install the server.
For details, see Installing a Server.
- Connect the power cables to the PSUs.
For details, see Connecting PSU Cables.
- Power on the server.
For details, see Power-On Procedure.
