Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Battery
Procedure
- Power off the server.
For details, see Power-Off Procedure.
- Remove the power cables from the PSUs.
For details, see Removing PSU Cables.
- Remove the server.
For details, see Removing the Server.
- Place the server on the ESD workstation.
- Remove the chassis cover.
For details, see Removing the Chassis Cover.
- Remove the screw-in RAID controller card.
For details, see Removing the Screw-in RAID Controller Card.
- Take the spare part out of its ESD bag.
- Determine the position of the battery.
- Holding the battery with the text side facing upwards, insert the left end of the battery into the slot, and gently press down the whole battery into the slot.Figure 8-152 Installing the battery
- Install the screw-in RAID controller card.
For details, see Installing the Screw-in RAID Controller Card.
- Install the chassis cover.
For details, see Installing the Chassis Cover.
- Install the server.
For details, see Installing a Server.
- Connect the power cables to the PSUs.
For details, see Connecting PSU Cables.
- Power on the server.
For details, see Power-On Procedure.
