No relevant resource is found in the selected language.
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Rear Panel Indicators
Rear Panel Indicators
Indicator Positions
Figure 2-17 Rear panel indicators
1
Connection status indicator/Data transmission status indicator for a 10GE optical port
2
Data transmission rate indicator for a 10GE optical port
3
Data transmission rate indicator for a 10GE electrical port
4
Connection status indicator/Data transmission status indicator for a 10GE electrical port
5
Data transmission status indicator for a GE electrical port
6
Connection status indicator for a GE electrical port
7
Data transmission status indicator for the management network port
8
Connection status indicator for the management network port
9
UID indicator
10
PSU indicator
Indicator Description
Table 2-3 Indicators on the rear panel
Indicators
Description
PSU indicator
Off: No power is supplied.
Blinking green at 1 Hz:
The input is normal, the server is in standby state.
The input is overvoltage or undervoltage.
The PSU is in deep hibernation mode.
Blinking green at 4 Hz: The firmware is being upgraded online.
Steady green: The power input and output are normal.
Steady orange: The input is normal, but no power output is supplied.
NOTE:
The possible causes of no power output are as follows:
Power supply overtemperature protection
Power output overcurrent or short-circuit
Output overvoltage
Short-circuit protection
Device failure (excluding failure of all devices)
UID indicator
The UID indicator helps identify and locate a device.
Off: The device is not being located.
Blinking blue: The device has been located and is differentiated from other devices that have also been located.
Steady blue: The device is being located.
NOTE:
You can turn on or off the UID indicator by pressing the UID button or remotely running a command on the iBMC CLI.
Connection status indicator for a GE electrical port
Off: The network port is not connected.
Steady green: The network port is properly connected.
Data transmission status indicator for a GE electrical port
Off: No data is being transmitted on the port.
Steady yellow: The network port is in active status.
Blinking yellow: Data is being transmitted.
Data transmission status indicator for the management network port
Off: No data is being transmitted on the port.
Blinking yellow: Data is being transmitted.
Connection status indicator for the management network port
Off: The network port is not connected.
Steady green: The network port is properly connected.
Connection status indicator/Data transmission status indicator for a 10GE electrical port
Off: The network port is not connected.
Blinking green: Data is being transmitted.
Steady green: The network port is properly connected.
Data transmission rate indicator for a 10GE electrical port
Off: The network port is not connected.
Steady green: The data transmission rate is 10 Gbit/s.
Steady yellow: The data transmission rate is 1 Gbit/s.
Connection status indicator/Data transmission status indicator for a 10GE optical port
Off: The network port is not connected.
Blinking green: Data is being transmitted.
Steady green: The network port is properly connected.
Data transmission rate indicator for a 10GE optical port
Off: The network port is not connected.
Steady green: The data transmission rate is 10 Gbit/s.
Steady yellow: The data transmission rate is lower than 10 Gbit/s.
