No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
STS-(3000K, 6000K)-H1 Smart Transformer Station Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MV Room

MV Room

No cable connector is installed in cabinet G1 or G3. The cable connectors in the figure are for reference only. The actual position and dimensions may vary.

DQS-24 (CVC)

Figure 2-14 DQS-24 (CVC)

(1) Operation hole of grounding switches

(2) Operation hole of load switches

(3) Operation hole of disconnectors

(4) Cable connectors

(5) Cable clamps

(5) Ground bar

DQS-24 (DVC)

Figure 2-15 DQS-24 (DVC)

(1) Operation hole of grounding switches

(2) Operation hole of load switches

(3) Operation hole of disconnectors

(4) Cable connectors

(5) Cable clamps

(5) Ground bar

DQS-36 and DQS-40.5 (CVC)

Figure 2-16 DQS-36 and DQS-40.5 (CVC)

(1) Operation hole of grounding switches

(2) Operation hole of load switches

(3) Operation hole of disconnectors

(4) Cable connectors

(5) Cable clamps

(5) Ground bar

DQS-36 and DQS-40.5 (DVC)

Figure 2-17 DQS-36 and DQS-40.5 (DVC)

(1) Operation hole of grounding switches

(2) Operation hole of load switches

(3) Operation hole of disconnectors

(4) Cable connectors

(5) Cable clamps

(5) Ground bar

CGM.3 (CVC)

Figure 2-18 CGM.3 (CVC)

(1) Operation hole of grounding switches

(2) Operation hole of disconnectors

(3) Cable connectors

(4) Cable clamps

(5) Ground bar

  

CGM.3 (DVC)

Figure 2-19 CGM.3 (DVC)

(1) Operation hole of grounding switches

(2) Operation hole of disconnectors

(3) Cable connectors

(4) Cable clamps

(5) Ground bar

  

GAE (CCV)

Figure 2-20 GAE (CCV)

(1) Operation hole of grounding switches

(2) Operation hole of load switches

(3) Operation hole of disconnectors

(4) Cable connectors

(5) Cable clamps

(5) Ground bar

Download
Updated: 2019-12-05

Document ID: EDOC1100115701

Views: 3044

Downloads: 221

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next