No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
STS-(3000K, 6000K)-H1 Smart Transformer Station Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Operating an Oil Surface Thermometer

Operating an Oil Surface Thermometer

  1. Rotate the cover counterclockwise to remove the glass cover.
  2. Take out the foam.
  3. Rotate the cover clockwise to reinstall the glass cover. Ensure that the white pointer is on the left and the red pointer is on the right.
  4. Rotate the knob to put the red and white pointers together.

    Figure 5-17 Operating an oil surface thermometer

Download
Updated: 2019-12-05

Document ID: EDOC1100115701

Views: 2600

Downloads: 195

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next