No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
STS-(3000K, 6000K)-H1 Smart Transformer Station Installation Guide
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Securing a Container

Securing a Container

  1. Secure a container.

    • There are four mounting holes where angle steel brackets contact the base. Mark all mounting holes. Each angle steel bracket must be secured by two mounting holes. Preferentially drill the outer two mounting holes. If steel bars in a concrete base block the drill bit, drill the inner mounting holes.
    • Ensure that the expansion bolts are tightened when securing the angle steel to the base.
    Figure 3-4 Securing a container

Download
Updated: 2019-12-05

Document ID: EDOC1100115701

Views: 2598

Downloads: 195

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next