Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
An Error Occurred When Starting slogd
This section applies only to NPU 20.0.X and NPU 20.1.X.
You can check the NPU version from the driver package name. For example, if the driver package name is A300-3000-NPU_Driver-20.0.0-ARM64-Ubuntu18.04.run, the NPU version is 20.0.0.
Symptom
When a container was mounted to the host directory of CentOS 7.6 and the su HwHiAiUser --command "/usr/local/Ascend/driver/tools/slogd &" command was run to start the slogd process, the following information was displayed:
[WARNING] Init config path failed and continue....
Solution
You are advised to uninstall Docker of the current version and install Docker 19.03.13. For details, see Host Directories Mounted to Container.