Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying Emulex HBA Driver Parameters
- From the Emulex official website, download the One Command Manager and install it to the Windows host:
- Open the Emulex HBA management tool. This tool will automatically detect the Emulex HBA port that the local host uses. Select the HBA port, click Driver Parameters tab, select the parameter you want to modify, type the value, and click Apply, as shown in Figure 7-3.
