Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying QLogic HBA Driver Parameters
- Download and install the QLogic HBA management tool. Go to the following website to download the tool:
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/DefaultNewSearch.aspx
- Open the management tool.
After downloading and installing the tool, open the tool (2.1.0 build 11) and run the qaucli command to navigate to the management CLI.
Figure 7-4 Management console CLI - Set HBA parameters.
Select 2: Adapter Configuration. The following window is displayed.
Figure 7-5 HBA parametersSelect 3: HBA Parameters. The HBA port status window is displayed.
Figure 7-6 HBA port statusSelect a port and go to the HBA Parameters Menu.
Figure 7-7 HBA parameters menuSelect 2: Configure HBA Parameters. The Configure Parameters Menu window is displayed.
Figure 7-8 Configure Parameters MenuSelect 13 and 15. Set the values of the parameters to 10. Then select 20: Commit Changes. After the configuration, check the HBA parameters.
Figure 7-9 HBA parameter configuration - Complete the configurations of all ports.
- Repeat the preceding steps to configure other ports.
