Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Transportation, Unpacking, and Checking
- To prevent the equipment from falling over, secure it to a pallet truck using ropes before moving it. Move the equipment with caution to avoid bumping or falling, which may damage the equipment.
After placing the equipment in the installation position, unpack it and take care to prevent scratches. Keep the equipment stable during unpacking.
- Before unpacking batteries, check whether the packaging is intact. Do not use batteries with damaged packaging. If any damage is found, notify the carrier and manufacturer immediately.
- After unpacking, check whether the fastening components and removable components are loose. If they are loose, notify the carrier and manufacturer immediately.
If the installation environment is poor, take dustproof and anti-condensation measures (for example, use a dust cover, plastic film, or fabric cloth) after unpacking batteries to prevent condensation and dust buildup, which may corrode the batteries.
SmartLi Cabinet
- Use a pallet truck to transport the cabinet to the installation position.
- Remove the packing case and dust cover. Keep the dust cover, accessories, and marking-off template aside.
- Check that the cabinet is intact.
- Visually inspect the cabinet appearance for damage caused during transportation. If any damage is founded, report the photos to the carrier immediately.
- Check that all fittings comply with the packing list. If there is any discrepancy, keep a record and contact the supplier immediately.
- After confirming that the cabinet is intact, remove the L-shaped bracket that secures the cabinet and pallet, and secure the sliding plate to the pallet using the two M12 screws that you have removed.Figure 5-3 Removing L-shaped bracketsFigure 5-4 Securing the sliding plate to the pallet
- Raise the four anchor bolts to the highest position using an adjustable wrenchFigure 5-5 Raising the anchor bolts to the highest position
- Slowly move the cabinet over its castors to the installation position.
Lithium Battery Side Cabinet
- Use a pallet truck to transport the cabinet to the installation position.
- Remove the packing materials and put aside the accessories and marking-off template.
- Check that the cabinet is intact.
- Visually inspect the cabinet appearance for damage caused during transportation. If any damage is founded, report the photos to the carrier immediately.
- Check that all fittings comply with the packing list. If there is any discrepancy, keep a record and contact the supplier immediately.