Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Sealing a Cabinet
- Check that cables are correctly routed.
- Fill in gap between the cables and the cabinet with sealing putty.Figure 5-68 Filling the hole with sealing putty
(1) Paper protective film
(2) Transparent film
(3) Sealing putty (with the transparent film facing upward)
- Reinstall all covers.
- If the lithium battery cabinet is not powered on after installation, reinstall the dust covers to prevent dust buildup inside the cabinet.Figure 5-69 Installing the dust covers
(1) Top dust cover
(2) Rear dust cover
(3) Front dust cover
