No relevant resource is found in the selected language.
Enterprise
Worldwide
Huawei Global - English
Search
Support Documentation
SmartLi 2.0 User Manual

The BOM Codes are 02312TDM and 02312TDM-001.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Component Technical Specifications

Component Technical Specifications

Table 3-6 BCU technical specifications

Item

Specifications

Dimensions (H x W x D)

130 mm x 442 mm x 550 mm

Weight

< 35 kg
Table 3-7 Technical specifications of the fire detection and extinguishing equipment

Item

Specifications

Extinguishant

Recommended extinguishant: heptafluoropropane or perfluorohexane

Extinguishant amount

3 kg

Operating temperature

0–50°C

CAUTION:

When the temperature is 50°C higher than the maximum allowable operating temperature, the cylinder may release pressure.
Table 3-8 Battery module technical specifications

Item

Specifications

Dimensions (H x W x D)

157 mm x 200.5 mm x 592 mm

Weight

≤ 35 kg

Rated voltage

64 V DC

Rated capacity

40 Ah

Rated discharge current

240 A

Battery overvoltage protection
  • Cell: overvoltage warning: > 3.8 V; level-1 protection: > 3.65 V; level-2 protection: > 3.9 V; level-3 protection: > 4.3 V
  • Battery string (eight packs): level-1 protection: > 564 V; level-2 protection: > 568 V; level-3 protection: > 580 V
  • Battery string (seven packs): level-1 protection: > 493.5 V; level-2 protection: > 497 V; level-3 protection: > 507.5 V

Battery undervoltage protection
  • Cell: undervoltage warning: < 2.9 V; level-1 protection: < 2.5 V; level-2 protection: < 2.3 V; level-3 protection: < 2 V
  • Battery string (eight packs): undervoltage warning: < 448 V; protection: < 408 V
  • Battery string (seven packs): undervoltage warning: < 392 V; protection: < 357 V

Overtemperature protection

> 67°C

Undertemperature protection

< –5°C

Overcurrent protection

Full-capacity cabinet (8+8 scenario):

  • Charge: level-1 protection: > 96 A; level-2 protection: > 200 A
  • Discharge: level-1 protection: > 580 A; level-2 protection: > 620 A

Full-capacity cabinet (7+7 scenario):

  • Charge: level-1 protection: > 96 A; level-2 protection: > 200 A
  • Discharge: level-1 protection: > 580 A; level-2 protection: > 620 A

Half-capacity cabinet (8+0 scenario):

  • Charge: level-1 protection: > 48 A; level-2 protection: > 100 A
  • Discharge: level-1 protection: > 290 A; level-2 protection: > 310 A

Half-capacity cabinet (7+0 scenario):

  • Charge: level-1 protection: > 48 A; level-2 protection: > 100 A
  • Discharge: level-1 protection: > 290 A; level-2 protection: > 310 A

EPO protection

You can trigger the EPO protection by performing EPO on the UPS or over the specified dry contact.
Table 3-9 Technical specifications of the lithium battery side cabinet

Item

Specifications

Dimensions (H x W x D)

2000 mm x 300 mm x 850 mm

Weight
  • < 130 kg (without fire extinguisher cylinders)
  • < 150 kg (with two fire extinguisher cylinders)
Translation
简体中文
Download
Updated: 2022-12-16

Document ID: EDOC1100117183

Views: 45966

Downloads: 2706

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next

Copyright © 2023 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :