Monitoring Interface Unit

1

PARALLEL1

Parallel port

Inter-cabinet parallel signal port 1

2

PARALLEL2

Parallel port

Inter-cabinet parallel signal port 2

3

RS485

Northbound communications port

• Connects to a third-party network management device over two wires.
• Supported protocol: Modbus-RTU

4

FE

Network port

• Connects to the WebUI over HTTPS, ECC800-Pro or NetEco over Modbus-TCP, or a third-party network management device over Modbus-TCP.
• Supported protocols: Modbus-TCP and HTTPS

5

COM

Northbound communications port

• Connects to a UPS.
• Supported protocol: Modbus-RTU

6

MDU

DB26

Connects to the MUS05A (DB26) port on the MDU for power supply and communication.

7

DO_1

Output dry contact

Function setting of output dry contact 1 for the lithium battery cabinet. The maximum voltage and current are 30 V DC/1 A or 60 V DC/0.5 A.

8

DO_2

Output dry contact

Function setting of output dry contact 2 for the lithium battery cabinet. The maximum voltage and current are 30 V DC/1 A or 60 V DC/0.5 A.

9

EPO

NO

EPO port

If the normally open (NO) signal port is connected to the EPO_12V port, emergency power-off (EPO) is triggered.

12V

NC

If the normally closed (NC) port is disconnected from the EPO_12V port, EPO is triggered.

12V

1

RS485+

2

RS485-

3

-

4

RS485+

5

RS485-

6

GND

7

CANH0

8

CANL0

1

RS485_T+

2

RS485_T–

3

-

4

RS485_R+

5

RS485_R–

6

GND

7

-

8

-