Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Storage System Configuration
This section details how to add initiators to the hosts on the storage system. For details on how to create hosts and mappings, see the Basic Storage Service Configuration Guide corresponding to your storage system.
- After configuring zones on the switches, log in to DeviceManager of the storage system. On the Hosts page, select the desired host, click
on the right, and choose Add Initiator.
Figure 5-1 Adding an initiator- The information displayed on the GUI may vary slightly with the product version.
- On DeviceManager of 6.0.1 and later versions, the
icon is changed to More.
- Check whether the host initiators can be discovered.Figure 5-2 Querying initiators
- Select the desired initiators and click
.
Figure 5-3 Selecting initiators - Click OK.Figure 5-4 Confirming initiators
- Confirm the information and click OK.Figure 5-5 Confirming the operation
- After the system prompts that the initiators have been added successfully, click Close.Figure 5-6 Initiators added successfully
- Click the host name and check the initiators. Ensure that the Status of the initiators is Online.Figure 5-7 Checking the initiator status
on the right, and choose Add Initiator.
icon is changed to More.
.
