UltraPath
Storage System Configuration
If UltraPath is used, retain the default host and initiator settings. By default, Host Access Mode is Load balancing. You can click the host name and check the settings on the Summary tab page.
- For details about the SUSE versions, see the Huawei Storage Interoperability Navigator.
- If a LUN has been mapped to a host, you must restart the host for the configuration to take effect after you modify Host Access Mode or Preferred Path for HyperMetro. If you map the LUN for the first time, restart is not needed.
- The information displayed on the GUI may vary slightly with the product version.
Host Configuration
Install, configure, and use UltraPath by following instructions in the OceanStor UltraPath for Linux User Guide.
- To obtain the document, log in to Huawei's technical support website (https://support.huawei.com/enterprise/), enter UltraPath in the search box, and select the associated path to the documentation page. Then find and download the desired document. To download software, click the Software Download tab and find the desired software.
- The UltraPath version matches the storage system version. You can query the version information in the version mapping table:
- Log in to https://support.huawei.com/enterprise/, enter your storage model in the search box, and select the associated path to the product documentation page.
- Find and download the version mapping table.
- Query the UltraPath version in the version mapping table.