Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Fabric-Attached iSCSI Connections
This section describes how to connect a host to a two-controller storage system and a four-controller storage system through iSCSI multi-path connections using switches.
Two-Controller Storage System
Figure 3-7 shows how to connect a host to a 2 U two-controller storage system through iSCSI multi-path connections using switches.
- In this connection diagram, two controllers of the storage system and two NIC ports of the host are connected to switches through Ethernet cables, ensuring the connectivity between the host ports and the storage.
- If you use LLDesigner to plan connectivity, you can obtain IP address data from the IP Address Planning worksheet in the exported LLD file.
Four-Controller Storage System
Figure 3-8 shows how to connect a host to a 4 U four-controller storage system through iSCSI multi-path connections using switches.
- In this connection diagram, four controllers of the storage system and two NIC ports of the host are connected to switches through Ethernet cables, ensuring the connectivity between the host ports and the storage.
- If you use LLDesigner to plan connectivity, you can obtain IP address data from the IP Address Planning worksheet in the exported LLD file.