Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
- About This Document
Installation Overview- Installing a Remote HA System (x86 Server, New Installation)
- Installing a Remote HA System (Incremental Installation)
- Verifying the System Installation
- Commissioning eSight
- Configuring System Services
- Commissioning eSight Component
- Enabling the Weak Algorithm Suite Configuration Switch
- (Optional) Configuring the DNS Server (eLTE Management Scenarios)
- (Optional) Configuring the NTP Server (eLTE Management Scenarios)
- (Optional) Rolling Back the NTP Server Configuration (eLTE Management Scenarios)
- (Optional) Configuring Web LMT Proxy (eLTE Management Scenarios)
- (Optional) Commissioning the Driver
- (Optional) Connecting the ELK Server to eSight
- Performing Security Settings
- Performing Security Hardening
- Applying for and Loading an eSight License
- Common Operations
- Common SUSE Linux Operations
- Checking the Status of Two-Node Cluster Resources
- Disabling Active/Standby Switchover
- Stopping eSight
- Starting eSight
- Restoring Active/Standby Switchover
- Manually Performing Active/Standby Switchover
- Running the Fault Clearing Tool
- Uninstalling eSight
- Starting the Maintenance Tool
- What Do I Do If eSight Displays a Security Certificate Error During Login
- Configuring the TLS Protocol Version for eSight
- Obtaining the IP Addresses of the Physical Machines Where VMs Are Located
- Checking and Disabling the Drive Cache of eSight Physical Machines
- FAQ
- Installation
- How Do I Configure a VM as an Exclusive Resource
- How Do I Do If eSight Cannot Start Because No Certificate Exists or the Certificate Expires
- Can I Install Two Sets of eSight on One Server
- Can I Switch Between Different Languages on the eSight Page
- How Do I Release Occupied eSight Ports
- How Do I Use FileZilla to Transfer Files
- Can I Store the eSight Installation Directory and Installation Disk in the Same Directory
- What Do I Do When eSight Installation, Upgrade, or Startup Fails Due to Port Detection Failures
- What Can I Do If the eSight Server Does Not Have Sufficient Hard Disk Space During eSight Installation, Startup, or Upgrade
- Can eSight Installed on a VM Be Connected to an SMS Modem
- How Do I Adjust eSight JVM Parameters When Physical Memory Changes After an eSight Installation
- What Can I Do If There Are High Memory Usage Processes When I Start eSight
- How Do I Configure the Configuration File Management Function of eSight to Generate a Device Configuration File Copy with a Fixed Name
- How to Obtain the IP Address of eSight
- How Do I Do If eSight Cannot Be Accessed Through NAT Mapping
- How Do I Use the Upgrade Check Tool
- How Do I Disable the Default Account admin
- How Do I Do If eSight Users Cannot Normally Use the System After Upgrade to V300R005C00 or a Later Version Due to Open API Changes
- How Do I Do If the Floating IP Address Cannot Be Used for Communication When the OMMHA Is Installed Properly
- How Do I Check Whether a Network Cable Is Connected to the Network Port of a Physical Machine?
- How to Configure RAID on the BIOS Page
- How Can I Implement Automatic Partitioning in the Software RAID Environment?
- What Do I Do If I Cannot Access the eSight Page Using Internet Explorer After the Patch Is Installed
- What Do I Do If the Third-Party System Fails to Be Interconnected After the Patch Is Installed
- How Do I View the Help Document for Environment Check During the Installation
- Linux Operating System
- How Do I Change the Password of the Root User in the Linux Operating System
- How Do I Install Component Packages
- How Can I Handle the Problem that the Listening Is 0.0.0.0 for Port 22 of the Linux Operating System
- How Do I Enable and Disable the Samba Service
- How Do I Set the UDP Parameters of the Linux OS
- How Do I Reduce the Time for Canceling TCP Connections in TIME_WAIT State on Linux
- How Do I Check Whether Host Names in the SUSE Linux System Files Are the Same
- How to Fix Garbled Characters in SUSE Linux Command Output
- How Do I Assign the Permission to Execute Files to the root User
- How to Use the VNC to Remotely Log In to SUSE Linux
- What Can I Do When I Run the ifconfig Command to Check the Network Interface and Find Packet Loss on the Network Adapter
- How Do I Adjust the Socket Buffer Size of the Linux OS
- Error 1007 Is Reported During SUSE Linux Installation After RAID Has Been Automatically Configured
- How Do I View and Change the Number of Operating System Handles
- What Can I Do If the Tool Window Is Not Displayed in the SUSE Linux Operating System
- How to Handle the Problem That the Untrusted Certificate Error Is Reported When VNC Access Is Enabled using vncmanager in SUSE 12
- What Can I Do If the Following Message Is Displayed During GUI Login of the SUSE 12: Sorry, you have to log out a previous session first. Multiple logins are not supported
- How Can I Solve the Problem that the User Name or Password Error Is Reported When the VNC Is Used to Log In to an Existing Session of the SUSE 12
- How Can I Handle the Problem that eSight Cannot Be Accessed When the SUSE Single-Node System Restarts After Power-off
- How Do I Bind Two Network Adapters on SUSE 12
- What Can I Do If I Cannot Perform Operations on the SUSE Linux Graphical Desktop Environment
- How Do I Disable the Firewall on the SUSE Linux
- How Do I Synchronize the eSight Server IP Address to eSight (Linux)
- How to Set the Network Adapter Binding (SUSE Linux)
- How Do I Do If a Message Indicating that the Password of the Linux Operating System User Has Expired Is Displayed During Installation or Upgrade
- How Do I Set the Kdump on SUSE Linux
- How Do I Check Hard Disk Specifications and Change the Boot Mode
- Manually Configuring the RAID (SAS3152)